Radio Voice Sounder
Description
Need more information about the Radio Voice Sounder or advice about your application?
Acoustic
| Output | Max. 126 dB (A) at 1 m |
| Sound types | Alarm tones and voice messages |
| Number of alarm tones | 45 |
| Number of custom messages | Up to 128 |
| Message length | Unlimited |
| Synchronisation | Yes |
| Audio file format | Wav 16-bit PCM / 48 kHz |
Radio
| Fréquency | 868 MHz |
| Modulation | LoRa |
| Standard | ETSI EN300 220 |
| Repeater | Yes |
| Network topology | Mesh |
| Range | Up to 1.2 km |
Bluetoooth
| Standard | 4.1 |
| Range | 5 m |
Electrical
| Mains supply voltage | SVL012 : 9 – 15 Vdc | SVL230 : 100 – 240 Vac 50/60 Hz |
| Boradcast consumption (typical) | SVL012 : 3 A | SVL230 : 0,4 A (230 Vac) |
| Sandby consumption (typical) | SVL012 : 100 mA | SVL230 : 30 mA |
| Trigger inputs | x 6 |
| Fault relay | x 1 |
| Alarm relay | x 1 |
| Terminal block | 24 – 12 AWG / 0,205 – 3,31 mm |
| Battery (SV230 only) | 12 V 0.8 Ah – Lead |
Mechanical
| Dimensions | 190 x 190 x 190 mm |
| Weight | SV012 : 2.2 kg | SV230 : 2.8 kg |
| Cable entries | 2 x Ø 20 mm, 2x cable glands included |
| Ingress protection | IP66 |
| Operating temperature | -25°C to +55°C |
| Relative humidity | 90% à 20°C |
| Material | ABS UL94 V-0 & 5 VA |
BROADCSTING OF TONES AND 100% CUSTOMISABLE PRE-RECORDED VOICE MESSAGES
- SmartVOX® SV voice sounders are fully compatible with the entire SmartVOX® range. They enable the broadcast of sounds and voice messages with high sound output
- Different scenarios can be activated on each SV sounder to deliver the most appropriate message for any situation
- All sounders within the same network can be triggered simultaneously, or only those in specific zones
- Priority levels can be assigned to each scenario to ensure the most critical message is always broadcast when needed.
EXTENSIVE SOUND COVERAGE | HIGH SOUND OUTPUT
- The adjustable sound output reaches up to 126 dB(A) at 1 metre, ensuring effective alerts in noisy environments and over long distances.
HIGH-PERFORMANCE RADIO COMMUNICATION
- The system uses LoRa modulation for radio communication, providing high reliability and long-distance coverage (up to 1.2 km in open areas)
- Each sounder acts as a repeater, meaning that activating a single sounder ensures the entire network receives the activation command
- The radio communication is secured with a network name and encryption key.
RELIABLE & MONITORED
- A backup battery keeps the system operational even in the event of a mains power failure.
- The radio communication status, mains power presence, and battery condition are continuously monitored and reported across the network.
- A beep and relay output provide fault aler.
ROBUST & WEATHERPROOF
- With an IP66 rating, SmartVOX® sounders are designed for both indoor and outdoor installation.
Examples of Voice Messages
Standard alarm tones
SmartVOX-Config est une application intuitive pour superviser et configurer vos équipements d’alerte SmartVOX®